2014年8月14日星期四

Manufacturer’s instructions on how to clean and maintain the Electronic Cigarette by Hekvapor



Like Hekvapor on the Facebook and win FREE E-cigs


Our products have passed rigorous quality control from our manufacturing, so The Electronic Cigarette needs little regular maintenance. The following guide is provided courtesy of e-smokers-forum.com and authored by Jim Davis.

HOW TO MAINTAIN YOUR UNIT:
http://www.hekvapor.com/

1. Clean the battery and atomizer by using purified alcohol to clean the contact points of the battery and atomizer with a clean paper tissue. By doing this regularly, your e-cig/PM will perform better.

2. Clean the inside of the atomizer with a paper tissue, to absorb remaining liquid.

3. If you feel your cigarette does not produce enough vapor or the pulling becomes heavy, it is time to clean. Blow through the atomizer side, on the other side you will see liquid coming out. After this operation, clean everything and dry it with a paper tissue. Your cigarette should be working better now. If the cigarette does not perform better, go to point

4. Take the inside of an old cartridge and pull it out of the mouthpiece. Rinse it with water and press it dry. Put it back in the cleaned mouthpiece. Pour 2 drops of hot water on the cartridge. Draw without inhaling for a few minutes and check the cartridges. If the cartridge is brown, take it out and repeat the procedure until clean. Then put in a new cartridge and new battery. Your cigarette should be ok now.

5. Self resetting: If you have the impression your cigarette does not develop enough vapor or the pulling is heavy you can try this: put the battery side in your mouth and blow on it. There are 2 little holes next to the LED light. Now your atomizer heats up and burns the rest liquid on the atomizer. Do not exceed 12 seconds of blowing or your atomizer will burn dead. After this operation your cigarette will function normal again. You will need to replace the battery and charge the one you just used.

GRAND CLEANING OPERATION:

Sometimes you might think your atomizer is dead, because vapor reduces significantly. In this case you can do the following:
                                                            
how to clean it?
1.) Take out the cartridge and mouthpiece and battery.

2.) Clean contact points of battery and atomizer with purified alcohol.

3.) Take the atomizer with the big opening up and pour purified alcohol inside. Shake the atomizer for 2 minutes, drain the alcohol through the small hole at the other side and repeat this at least 3 times

4.) Rinse the atomizer with hot water and let it dry for 16 hours standing up.

5.) After 16 hours, if your atomizer is dry, you can put in a new cartridge and new battery. Your cigarette will work normal again.

Never miss more savings at Hekvapor and get away from stink-eye there.

Like Hekvapor & enjoy FREE personal vaporizer.




This guide is intended to be used as reference only. The Author, Indy Vapor Shop and Hekvapor are not responsible for any damage or injury connected with this information. Users should abide by all rules of safety when using, maintaining, or modifying any e-cig components.
 


没有评论:

发表评论